Factory:  Corner Steyr & Alfa Sts 
Aureus Industrial sites 
RANDFONTEIN  
Email: info@keramicalia.co.za
Website: www.keramicalia.co.za
Cell: Dave  082  808 4757
Email: keraccounts@iafrica.co.za
Accounts: Myrtle Wakeford
Tel: (011) 764 2139
Tel: (011) 412 3261
P O  Box 2288
Wilro Park,1731

Description: An abrasion resistant high strength castable for use up to 1200°C. The matrix is very hard, and fracture will occur right through the aggregate grains.

Physical properties:       Bulk density: 2,25g/cm³
                                     Cold crushing strength: 100 to 150MPa
                                     Permanent linear change: -0,2% after 800°C
                                     Thermal conductivity: 1,6W/mK
Chemical analysis;

Al2O3 46.0%
FE2O3 0.9%
SiO2 49.0%

Installation ;Place +7,5% water in a planetary (bakery type) mixer. Add half of the powder and mix until fluid. Add another quarter of the powder and mix until fluid. Slowly add the last quarter of powder, keeping the mix fluid. This will take about 5 minutes. The result is a self-levelling fluid.


Packing:
25kg plastic bags